Free savings check

Calculate your savings

Move the sliders to match your plant’s averages. The estimate updates as you go: how much money is leaking each year, and where. Free, no sign-up, and nothing you enter leaves your screen.

Your plant, on average

Rs 50.0 lakh

The total you pay in a normal month

800 kW

Printed on your bill as MDI

+20% (960 kW)

Your worst month in the last year

3 of 12
0.88

On your bill, or 0.88 if you don't know

20%

Peak units ÷ total units on your bill

Estimated money leaking each year

Rs 21.0 lakh to 43.9 lakh

About 3.5% to 7.3% of your yearly electricity bill of Rs 6.00 crore.

Where it leaks, per year

Solid: cautious figure. Lighter: the full range.

Peak demand spikes: Rs 3.0 lakh to 6.0 lakh a year3.0 lakh to 6.0 lakhPeak demandspikesPeak-hour usage: Rs 3.6 lakh to 9.1 lakh a year3.6 lakh to 9.1 lakhPeak-hour usagePower factor penalty: Rs 4.8 lakh a year4.8 lakhPower factorpenaltyIdle running: Rs 9.6 lakh to 24.0 lakh a year9.6 lakh to 24.0 lakhIdle running

Your yearly bill

Rs 5.79 crore neededat least Rs 21.0 lakh leaking, of a Rs 6.00 crore yearly bill (slice drawn larger to show the causes)
  • Peak demand spikesEstimateRs 3.0 lakh to 6.0 lakh a year

    In 3 months your demand rose up to 160 kW above usual. Each kW costs Rs 1,250 a month in fixed charges. Live alerts in the 30-minute block stop those spikes.

  • Peak-hour usageEstimateRs 3.6 lakh to 9.1 lakh a year

    20% of your units fall in peak hours, at about Rs 13 more per unit. Moving 10% to 25% of that load off-peak is usually possible without changing production.

  • Power factor penaltyTariff ruleRs 4.8 lakh a year

    At 0.88 your fixed charges rise 4% under the tariff rules (2% for each 1% below 0.90). Working capacitors remove all of it.

  • Idle runningEstimateRs 9.6 lakh to 24.0 lakh a year

    Machines, compressors and lights left running between shifts and on holidays. 2% to 5% of the bill is a cautious figure; monitoring measures the real one.

This is an estimate, not a promise. Your real saving can be higher or lower. It depends on how many of these fixes your plant actually makes. Ventoris monitoring measures the real figure minute by minute, and you only ever pay from savings verified against your own bill.

How the estimate works

Peak demand spikes

Your highest 30-minute demand (MDI) sets a fixed charge of Rs 1,250 per kW every month. We count the months it ran above your usual level and what those extra kW cost.

Peak-hour usage

Units used in peak hours cost about Rs 13 more each. We assume 10% to 25% of that load can move off-peak without changing production.

Power factor penalty

Under the tariff rules, a power factor below 0.90 raises fixed charges by 2% for each 1% short. Working capacitors remove all of it.

Idle running

Power used by machines left running between shifts. A bill can't show it, so we use a cautious 2% to 5% of the bill.

Rates are the current industrial time-of-use tariff; taxes are taken as about 20% of the bill. Averages can’t show when or where power is wasted, which is why most figures are ranges. Our monitoring measures them minute by minute, and you only ever pay from savings verified against your own bill. See the live demo dashboard →